Avocent MERGEPOINT 53XX SP MANAGER User's Guide download pdf (Page 86)

Configuring SoL parameters

The MergePoint SP manager allows you to define SoL parameters for certain types of SPs,

including Enable/Disable Serial over LAN, baud rate and channel privilege limitlevel.

To configure SoL parameters:

1. In the side navigation bar, click an SP name.

2. Click the Configuration tab.

3. In the top navigation bar, click Serial over LAN. The Serial over LAN Configuration

windowappears.

4. Specify any of the following information:

a. Select or deselect Enable Serial over LAN as desired.

b. From the Baud Rate drop-down menu, select the baud rate.

c. From the Channel Privilege Level Limit drop-down menu, select Administrator,

Operator or User as the privilege level.

d. From the Retry Count drop-down menu, select the number of times for a retry to occur,

from 0 to 7 times.

e. In the Retry Interval field, enter the number of 10 milliseconds to elapse between each

retry.

5. Click Apply.

NFS

Network File System (NFS) provides remote access to SoL history information across networks.

By default, SoL history information is saved to the MergePoint SP manager. To free memory

space on the MergePoint SP manager, you may configure the SoL history data to be saved to

another network location and access the SoL directories from anywhere on the network.

To configure NFS storage of SoL history data (Admin users only):

1. Click System - NFS.

2. Select Enable and specify the following information:

a. In the Server IP field, type the IP address of the NFS server.

b. In the Mount Directory field, type the directory pathname exported from the NFS

server.

c. From the Protocol drop-down menu, select the mount protocol.

3. Click Apply.

74 MergePoint® SP Manager Installer/User Guide

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 235 236

No comments

Avocent MERGEPOINT 53XX SP MANAGER User's Guide Page 86