Avocent MERGEPOINT 53XX SP MANAGER User's Guide download pdf (Page 120)

Command Name Description

ssh Starts an SSH session on the server.

telnet Starts a Telnet session on the server.

Telnet

You can start or stop the Telnet service at any time.

To start or stop Telnet service:

1. Log into the MergePoint SP manager console as root.

2. Edit the Telnet file using the following command:

root@Mergepoint:~# vi /etc/xinetd.d/telnet

3. Set the value of "disable" to "yes" or “no” to disable or enable the Telnet service.

4. Quit vi and run the following command to apply the setting and restart the Telnet service.

root@Mergepoint:~# /etc/init.d/xinetd restart

NOTE: You can also enable or disable Telnet in the System - Settings window in the web interface. See Configuring

the MergePoint SP Manager System Settings (Admin Users Only) on page 46.

Displaying the MergePoint SP Manager Firmware Version

To display the firmware version:

1. Open an SSHsession. (See Using SSH with the MergePoint SP Manager on page 104).

2. Enter the following command.

root@MergePoint:~# version

3. The current firmware version is returned.

Configuring the Users’ Console Login Menu

Regular users are configured with /usr/bin/rmenush as their default login shell. All users with

rmenush as their login shell see the same menu whenever they log into the console.

The MergePoint SP manager administrator can configure the rmenush menu to display other

options including links to additional submenus or commands by modifying the /etc/menu.ini

file.

108 MergePoint® SP Manager Installer/User Guide

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 235 236

No comments

Avocent MERGEPOINT 53XX SP MANAGER User's Guide Page 120