Avocent MERGEPOINT 53XX SP MANAGER User's Guide download pdf (Page 67)

c. Type up to four IP addresses in the Alert Destination IP Address fields.

NOTE: To allow the MergePoint SP manager to receive alerts from the SP, one field should contain the IP address

of the MergePoint SP manager.

4. Click Apply.

To set a user and password for all SPs in a group:

1. Click SP - Group.

2. In the Group list, select the group(s) you wish to modify and click Set User and Password.

- or -

Click a group name from the explorer tree in the side navigation bar, click Action in

the top navigation bar, then click Set User and Password.

3. Enter the requested information and click Apply.

To manage SP groups:

1. Click a group name from the explorer tree in the side navigation bar.

2. Select the SP(s) you wish to copy or move.

3. Click the corresponding button and follow the on-screen instructions.

Monitoring and Management

Viewing sensor status

The MergePoint SP manager can detect the status of fan, temperature and voltage sensors on

managed SPs. By clicking the Sensor tab, you may view a detailed report of a device’s sensors

that includes the sensor name, type, current reading and status.

NOTE: For some types of SPs, you can change a temperature scale to view sensor information.

To view sensor status:

1. In the side navigation bar, click an SP name.

2. Click the Sensor tab.

3. In the top navigation bar, click Sensor. The Sensor window and a detailed list of sensors

and corresponding information appears.

Viewing SEL events

You may use the MergePoint SP manager to view the SEL (System Event Log) on a managed

SP.

Chapter 3: Operations 55

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 235 236

No comments

Avocent MERGEPOINT 53XX SP MANAGER User's Guide Page 67