characters when assigning values to parameters.
current ipv4 address: 172.26.30.249
current ipv6 address:
eth0:
device_status (disabled, enabled) [enabled]:
Network/Settings
1. Type cd network/settings to navigate to the Network settings level.
--:- / cli-> cd network/settings/
2. Type show to view the list of available options.
Network Navigation Tree
settings
domain=
enable_ipv6=
hostname=
primary_dns=
secondary_dns=
enable_ipv6
get_dns_from_dhcpv6=
get_domain_from_dhcpv6=
Table 4.6: Network Options
Network/IPv4 and IPv6 Static Routes
The following table displays options for configuring IPv4 and IPv6 Static Routes.
IPv4 and IPv6 Static Routes Navigation Tree
ipv4_static_routes
default_3
Table 4.7: Network/IPv4 and IPv6 Static Routes Options
Chapter 4: Accessing a PM PDU via the Command Line Interface 63
Comments to this Manuals