Avocent PM3000 User's Guide download pdf (Page 70)

ipv6_static_routes/

hosts/

firewall/

snmp/

Wiz command

The wiz command allows administrators to easily and quickly perform the initial network

configuration of the eth0.

At the command prompt at the / level, enter wiz to view the current IP configuration. To

change the IP configuration, press Tab to move through the parameters, and press Esc + Tab to

edit the selected parameter. When you are finished, enter yes to confirm that all parameters are

correct and to save the new parameters.

--:- / cli-> wiz

current ipv4 address: 172.26.30.249

current ipv6 address:

eth0:

device_status = enabled

ipv4_method = dhcp

ipv4_address = 192.168.160.10

ipv4_mask = 255.255.255.0

ipv4_default_gateway =

ipv6_method = ipv6_address_unconfigured

ipv6_address =

ipv6_prefix_length =

ipv6_default_gateway =

mac address: 00:e0:86:21:67:72

dns:

primary_dns = 172.26.29.4

secondary_dns =

domain = corp.avocent.com

hostname = PM3000-10-0011223344

Some basic and useful keys are:

- tab (once/twice) - shows the next possible commands/option(s)

- cntrl e - gets the current parameter value for editing

Other hints:

- Use backslash '\' to escape spaces, '\' and other control

62 Avocent PMPDU Installer/User Guide

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 116 117

No comments

Avocent PM3000 User's Guide Page 70