Avocent PM3000 User's Guide download pdf (Page 16)

Rack Mounting the PM PDU

You may rack mount the PM PDU or place it on a desktop or other flat surface. A horizontal

PM PDU can be mounted in a 1U fashion using the included brackets. It can be mounted on

either the front or back to display outlets and LEDs on either the front or rear of the rack. A

vertical PM PDU can be mounted utilizing the side bars in the rack. When using the sidebars,

the PM PDU can be mounted with the outlets on either the top end or the bottom end of the

PM PDU.

Mounting a horizontal PM PDU

Attach the supplied mounting brackets to the PM PDU using the four retaining screws provided

for each bracket. Align the mounting holes of the brackets with the notched holes on the

vertical rail of the rack and attach with the retaining screws. Attach the supplied retention clips

(single retention clip for 3-port PM PDU, dual retention clip for 6-port PM PDU) using the

notches to the side of the outlets on the PM PDU. Use the provided retention clips or

VELCRO® strips to secure the power cords to the PM PDU.

NOTE: Ensure each bracket is attached to the correct side of the PM PDU so that neither bracket is covering any

part of the air vents on the sides of the PDU.

8 Avocent PMPDU Installer/User Guide

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 116 117

No comments

Avocent PM3000 User's Guide Page 16