Avocent PM3000 User's Guide download pdf (Page 18)

Figure 2.2: Attaching VELCRO® Retention Strips for a Horizontal PM PDU

Mounting a vertical PM PDU

Rack mounting using the tool-less keyed mounting hardware

Locate the two pre-installed round plastic keys on the far ends of the back of the PM PDU.

Line up each key with the large end of the keyhole-shaped mounting socket on each end of the

rack. Insert the keys and then pull down to lock the PM PDU in place. Use the provided

retention clips or VELCRO strips to secure the power cords to the PM PDU.

Rack mounting using the universal mounting brackets

Locate the four pre-installed machine screws on the ends of the back of the PM PDU. Remove

these four screws, leaving the the plastic keys installed. Using the same screws you just

removed, attach the L-shaped universal mounting brackets to the PM PDU, making sure they

are in the desired orientation. Using two screws (designed for your rack) for each bracket, attach

the PM PDU to the rack. Leave enough space at either end for cable connections. Attach the

supplied retention clips or VELCRO strips using the notches to the side of the outlets on the

PM PDU.

NOTE: Ensure the positioning of the bracket does not interfere with equipment in the rack or doors.

10 Avocent PMPDU Installer/User Guide

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 116 117

No comments

Avocent PM3000 User's Guide Page 18