Avocent CCM4850 User Manual download pdf (Page 47)

Chapter 4: Using CCM Appliance Commands 35

Not every command will contain all syntax types. For example, the following command reboots the

CCM appliance.

>SERVER REBOOT

In this case, both SERVER and REBOOT are positional commands.

In most cases, one or more spaces separate positional commands, positional parameters and

keyword parameters.

For most positional commands, positional parameters or keyword parameters, you only need to

enter the first three characters. The exceptions are:

• When you specify a terminal type with the Type parameter in the Server CLI command, you

must enter all characters.

• When you specify an authentication method with the Auth parameter in the Server SSH com-

mand, you must enter all characters.

• When you specify control signal monitoring with the Power parameter in the Port Set com-

mand, you must enter all characters.

• When you specify the console port in commands such as Port Set and Show Port, you must

enter the capitalized abbreviation

CON.

With the exception of usernames and passwords, commands are not case sensitive; they may be

entered in uppercase, lowercase or a combination. For example, all of the following commands

are correct.

> PORT 2 SET BAUD=57600 FLOW=XON

> POR 2 SET BAU=57600 FLOW=XON

> por 2 Set Baud=57600 flow=xon

> port 2 set baud=57600 flow=xon

NOTE: Usernames and passwords are case sensitive. These values are stored exactly as you enter them. For

example, the username “Ann” must be entered with an uppercase “A” and all other letters lowercase. The

username “ANN” will not be accepted as the username “Ann.” Usernames and passwords must contain 3-16

alphanumeric characters.

Any syntax errors are displayed, and where applicable, the error is underlined.

In the following example, the keyword parameter “baud” is misspelled. Even if more than three

characters are entered, they must all be correct.

> port 2 Set Baux=57600 flow=xon

----

ERR 26 - SET keyword parameter invalid

XONXOF Keyword value.

Table 4.3: Command Syntax Types in Example Command (Continued)

Value Syntax

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 99 100

No comments

Avocent CCM4850 User Manual Page 47