Avocent CCM4850 User Manual download pdf (Page 71)

Chapter 5: CCM Appliance Commands 59

Show Port command

The Show Port command displays configuration and status information about one or all ports.

Access right: SMON

Access level: ADMIN or APPLIANCEADMIN

Syntax

SHOW PORT [<port>|ALL|NAMES]

The SHOW PORT NAMES command display includes the port numbers and names. If a port has

not been given a name with a Port Set command, the default name is displayed. A default name

contains the last three octets of the MAC address plus the port number.

Table 5.24 lists the display fields for a Show Port command that specifies one or all ports.

Show Server SNMP Displays SNMP configuration information.

Show User Displays user configuration and session information.

Table 5.22: Show Command Summary (Continued)

Command Description

Table 5.23: Show Port Command Parameter

Parameter Description

<port>

Either a port number in the range 1-48 or CON.

Default = your port

ALL Displays information about all ports.

NAMES Displays port numbers and associated logical names.

Table 5.24: Show Port Command Display Fields

Field Content

Port Port number.

Serial Port Settings

Comma-separated string of port values: baud rate, number of bits, parity, stop bits,

flow control, socket number, time-out value and CLI access character (from Port Set

command). The CLI character is preceded by POR CLI= if it was defined with a Port

Set command or by SER CLI= if it was defined with a Server CLI command.

TX Bytes Number of bytes transmitted.

RX Bytes Number of bytes received.

Errors Number of TX/RX parity and framing errors.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 99 100

No comments

Avocent CCM4850 User Manual Page 71