Avocent CCM4850 User Manual download pdf (Page 69)

Chapter 5: CCM Appliance Commands 57

Syntax

SERVER SNMP TRAP [ENABLE|DISABLE] [ALL]

Example

The following command enables the linkUp, userDeleted and userLogin SNMP traps.

server snmp trap enable

Traps now disabled:

1) linkUp 4) userLogin

2) userAdded 5) imageUpgradeStarted

3) userDeleted

Select trap(s) to enable>1,3-4

Server SNMP Trap Destination command

The Server SNMP Trap Destination command defines or deletes destinations for enabled SNMP

traps. Once you define destinations for enabled SNMP traps, when a trap occurs, the CCM

appliance will generate SNMP trap messages to each defined SNMP trap destination. You may

define up to four trap destinations, using separate commands.

For more information, see Managing the CCM Appliance Using SNMP on page 28.

Access right: SCON

Access level: APPLIANCEADMIN

Syntax

SERVER SNMP TRAP DESTINATION ADD|DELETE <ip_address>

Server SSH command

The Server SSH command enables or disables SSH session access to the CCM appliance and

specifies the SSH authentication method. When you enable SSH, all CCM sessions will be

Table 5.19: Server SNMP Trap Command Parameter

Parameter Description

ENABLE|DISABLE

Enable generates a numbered list of currently disabled traps from which you choose

those to enable. Disable generates a numbered list of currently enabled traps from

which you choose those to disable.

Table 5.20: Server SNMP Trap Destination Command Parameters

Parameter Description

ADD|DELETE Defines or deletes the specified destination.

<ip_address> IP address of trap destination.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 99 100

No comments

Avocent CCM4850 User Manual Page 69