Avocent CCM4850 User Manual download pdf (Page 66)

54 CCM4850 Installer/User Guide

Syntax

SERVER SECURITY [AUTHENTICATION=<auth>] [ENCRYPT=<conns>]

[LOCKOUT=<hours>]

Server Set command

The Server Set command changes CCM appliance address settings. You may specify one, two or

all three parameters. A reboot is required if you change the IP address.

Access right: SCON

Access level: APPLIANCEADMIN

Syntax

SERVER SET [IP=<ip_address>] [MASK=<subnet>] [GATEWAY=<gtwy>]

Table 5.14: Server Security Command Parameters

Parameter Description

AUTHENTICATION=

<auth>

Authentication method. You may specify multiple values (other than None),

separated by commas. Valid values are:

LOCAL Use the local CCM user database to authenticate users.

RADIUS Use the previously defined RADIUS server(s) to authenticate users.

NONE Do not authenticate users. This method cannot be used when SSH access

is enabled, and it cannot be combined with other authentication methods.

Default = LOCAL

ENCRYPT=<conns>

Enables/disables plain text Telnet or SSH connections. You may enable both by

specifying both values, separated by a comma. Valid values are:

SSH Enables SSH connections.

None Enables plain text Telnet connections.

Default = None

LOCKOUT=<hours>

Enables or disables security lock-out. To enable, specify the number of hours in the

lock-out period, in the range 1-99. To disable, specify a zero value.

Default = 0 (disabled)

Table 5.15: Server Set Command Parameters

Parameter Description

IP=<ip_address> IP address.

MASK=<subnet> Subnet mask for the subnet on which the CCM appliance resides.

GATEWAY=<gtwy> IP address of default gateway for routing IP packets.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 99 100

No comments

Avocent CCM4850 User Manual Page 66