Avocent Cyclades ACS User's Guide download pdf (Page 97)

When the modem detects the escape sequence, the OK result Result code will be displayed

and the modem is in the On Line Command State. The ATH or ATZ command can now be

issued to disconnect the call.

Selecting country codes

Setting the modem’s country code is done by with the +GCI command. To change to one of

the 30 available countries, issue the AT+GCI=n command where “n” is one of the two digit

country codes. This command must be issued each the modem is turned on. It will not

automatically store or save this setting. It should be part of the Initialization string.

Example: AT+GCI=00<CR> Meaning: Change country code to Japan.

OK Meaning: The modem has accepted the command and is

now configured to operate in Japan

AT+GCI?<CR> Meaning: Display current country code

+GCI:00 Meaning: (Japan is the current country selected).

To view which countries are available in the modems firmware, enter AT+GCI=?<CR>.

The modem will display all of the possible two digit country codes available.

Country Code Country Code Country Code

Australia 09 Hong Kong 50 Poland 8A

Austria 0A India 53 Portugal 8B

Belgium 0F Ireland 57 South Africa 9F

Brazil 16 Italy 59 Singapore 9C

China 26 Japan 00 Spain A0

Denmark 31 Korea 61 Sweden A5

Finland 3C Mexico 73 Switzerland A6

France 3D Netherlands 7B Taiwan Fe

Germany 42 Norway 82 TBR21 FD

Table E.7: Country Codes List

89 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide

1 2 ... 92 93 94 95 96 97 98 99 100

No comments

Avocent Cyclades ACS User's Guide Page 97