Avocent Cyclades ACS User's Guide download pdf (Page 75)

To configure a PDU:

1. Click Settings to expand the side navigation bar.

2. Click Outlets.

3. Click on an outlet number to change its settings. Click Save, then click Close.

-or-

Check two or more boxes next to the outlets for which you want to change settings.

Click Edit to change the settings for the outlets you selected. Click Save.

4. Click PDU to view and configure PDU settings. Click Save when finished.

5. Click Phases or Banks.

a. Click on the name of a phase or bank to change its settings, or click one or more boxes

next to the phase(s) or bank(s) you want to change.

b. Click Save to save the settings and click Close to return to the Phase screen.

NOTE: The PDU model defines available parameters in the Settings window.

An administrator can change the login password for a supported PDU type. This password is

used by the console server to communicate with the PDU. (Only one password is supported for

all PDUs of the same type.)

To change a PDU password:

1. Select Power Management - Login.

2. To change the password for an Avocent or Cyclades PDU, an Avocent SPC power control

device or a Server Tech PDU, enter the password in the appropriately labeled section.

3. Click Save.

Outlet Groups

By selecting the Outlet Groups tab, you can view status, outlet and power consumption for

outlet groups, as well as configure them. You can also turn on, turn off or cycle selected outlet

groups.

To manage outlet groups:

1. Select Power Management - Outlet Groups.

2. Check the box next to the name of the Outlet Group you want to manage.

3. Click the On, Off or Cycle radio button, if desired.

Chapter 3: Accessing the Console Server via the Web Manager 67

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 99 100

No comments

Avocent Cyclades ACS User's Guide Page 75