Avocent Cyclades ACS User's Guide download pdf (Page 44)

a. Enter the SysContact information (email address of the console server’s administrator,

for example, acs6000_admin@avocent.com).

b. Enter the SysLocation information (physical location of the console server, for

example, Cyclades_ACS6000), then click Save to go back to the SNMP screen.

3. Click Add to add a new community or v3 user.

4. Enter the community name for SNMP v1/v2 or the user name for SNMP v3 in the Name

field and enter the OID.

5. Select the desired permission from the pull-down menu. Choices are Read and Write or

Read Only.

6. If the required SNMP version is v1 or v2, click the Version v1, v2 button, then enter the

source (valid entry is the subnet address).

-or-

If the required SNMP version is v1 or v2 using an IPv6 network, click the Version

v1,v2 for IPv6 network button, then enter the source (valid entry is the subnet address).

-or-

If the required SNMP version is v3, click the Version v3 button, then select the

Authentication Type (MD5 or SHA), enter the authentication passphrase or password,

select the Encryption Method (DES or AES), enter the privacy passphrase and select

the Minimum Authentication Level (NoAuthNoPriv, AuthNoPriv, AuthPriv).

7. Click Save.

Ports

An administrator can enable and configure serial ports, auxiliary ports, the CAS Profile and the

Dial-in Profile from the Ports tab in the side navigation bar. On the auxiliary ports screen, you

can enable the auxiliary port and configure it based on the type of connected device.

Serial ports

On the Serial Ports table, you can specify the connection profile (CAS, Dial-In or Power) based

on the type of connected device and you can clone the port, reset to factory defaults and

enable/disable ports.

To enable or disable one or more serial ports:

1. Select Ports - Serial Ports.

2. Click the checkbox for each port you want to enable or disable.

3. Click the Enabled or Disabled button.

36 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 99 100

No comments

Avocent Cyclades ACS User's Guide Page 44