Avocent AVWorks User's Guide download pdf (Page 56)

50 AVWorks Installer/User Guide

5. Add up to four SNMP management entities to monitor this appliance or leave

this blank to allow any station to monitor the appliance.

a. Click the Add button to deﬁ ne an allowable manager. The Allowable

Manager dialog box appears.

b. Type in the IP address of the management station to add.

c. Click OK to add a management station.

6. Add up to four SNMP trap destinations to which this appliance will send

traps in the Trap Destination ﬁ eld.

a. Click the Add button to deﬁ ne a trap destination. The Trap Destina-

tion dialog box appears.

b. Type in the IP address of the trap destination to add.

c. Click OK to add a trap destination.

7. Click OK to save the settings and close the window.

-or-

Click Apply to save the settings and remain in the open window.

-or-

Click Cancel to exit the window without saving.

Enabling individual SNMP traps

An SNMP trap is a notification sent by the appliance to a management station

indicating that an event has occurred in the appliance that may require further

attention. You can specify what SNMP traps are sent to the management

stations by simply clicking the appropriate checkboxes in the list. When you

select the Traps category for the first time, the AMP will retrieve and display a

list of SNMP traps from the appliance. You may select Enable All or Disable All

to easily select or deselect the entire list.

Figure 4.6: Traps Dialog Box

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 79 80

No comments

Avocent AVWorks User's Guide Page 56