Avocent DSR1020 User Manual download pdf (Page 36)

26 DSR Switch Installer/User Guide

Figure 3.10: Broadcast Dialog Box

NOTE: Broadcasting Keystrokes - The keyboard state must be identical for all target devices receiving a

broadcast to interpret keystrokes identically. Specifically, the Caps Lock and Num Lock modes must be the

same on all keyboards. While the switch attempts to send keystrokes to the selected target devices

simultaneously, some target devices may inhibit and thereby delay the transmission.

Broadcasting Mouse Movements - For the mouse to work accurately, all systems must have identical mouse

drivers, desktops (such as identically placed icons) and video resolutions. In addition, the mouse must be in

exactly the same place on all screens. Because these conditions are extremely difficult to achieve, broadcasting

mouse movements to multiple systems may have unpredictable results.

To broadcast to selected target devices:

1. From the Broadcast dialog box, select the mouse and/or keyboard checkboxes for the target

devices that are to receive the Broadcast commands.

-or-

Press the Up or Down Arrow keys to move the cursor to the target device. Then press Alt+K to

select the keyboard checkbox and/or

Alt+M to select the mouse checkbox. Repeat for

additional target devices.

2. Click OK to save the settings and return to the Setup dialog box. Click X or press Escape to

return to the Main dialog box.

3. Click Commands. The Commands dialog box appears.

4. Click the Broadcast Enable checkbox to activate Broadcasting.

5. From the user station, type the information and/or perform the mouse movements you wish

to broadcast.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

No comments

Avocent DSR1020 User Manual Page 36