Avocent Cyclades ACS48 2DC User's Guide download pdf (Page 148)

132 Cyclades ACS Advanced Console Server Installation/Administration/User Guide

b. To select multiple ports in a range, click the first port in the list and then hold down the

Shift key while selecting another port or ports.

c. To select multiple ports that are not in a range, click the first port in the list and then hold

down the

Ctrl key while selecting another port.

To enable or disable serial ports:

1. Go to Ports - Physical Ports and select a port or ports to modify.

2. To enable selected ports, click the Enable Selected Ports button.

3. To disable selected ports, click the Disable Selected Ports button.

NOTE: By default, all Serial Ports are disabled from the factory. The Administrator can activate and assign

specific users to individual physical ports.

4. Click apply changes.

General form

Under Ports - Physical Ports in Expert Mode, if you select one or more ports from the ports list and

click the Modify button, the General form appears as shown in the following form.

Figure 9.2: Ports - Physical Ports - General Form

The General form allows you to define general port settings, connect to an IPDU port and select the

connection type to a serial port (SSH, Telnet or both).

The number of the selected port or ports displays next to the Done button at the bottom of the form

in the format: Selected ports #:N, where N stands for the port number.

Connection profiles

The following sections describe the available connection protocols for each connection to the

serial ports.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 211 212

No comments

Avocent Cyclades ACS48 2DC User's Guide Page 148