Avocent AMX5000 User's Guide download pdf (Page 72)

60 AMX Switch Series Installer/User Guide

• PS/2 Dual-Port

• SUN Dual-Port

•USB Dual-Port

• Serial Single-Port

• MDM target device

5. Type a new name (1-15 characters) for the device in the Name field.

6. If the device is an AMIQ-USB/AMIQDM-USB module or AMIQ-VSN/AMIQDM-VSN

dule, select a keyboard country layout, shown in Table 3.1 on page 48, from the Layout

drop-down list. For all other devices, this field is disabled.

7. If the device is an AMIQ-USB/AMIQDM-USB module or AMIQ-VSN/AMIQDM-VSN

dule, select the emulation setting for the device from the Emulation drop-down list. For all

other devices, the field is disabled.

8. To save changes and return to the Device Admin screen, click Appl

y. To exit the OSCAR

interface, click Cancel or X.

To edit a device (seamless configuration):

1. Press

Ctrl+Ctrl to launch the OSCAR interface.

2. Click the Admin tab. The Device Admin screen displays.

NOTE: The Device Admin screen will display only the devices that are currently attached to the switching system

and powered. Only the Administrator can edit device attributes.

3. From the drop-down list, select the device you wish to edit.

4. Click the Ed

it Device button. The Edit Device screen displays.

5. Type a new name (1-15 characters) for the device in the Name field.

From the Target drop-down list, select the cascaded Avoce

nt KVM switch to which the IQ

module is attached.

- or -

Select KVM Switch

if the cascaded switch is a non-Avocent switch.

AMX.book Page 60 Thursday, June 12, 2008 4:14 PM

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 247 248

No comments

Avocent AMX5000 User's Guide Page 72