Avocent Hub SuperSerial User Manual download pdf (Page 12)

12 Equinox ESP Multi-Interface Serial Hub Product Installation Guide

2.4.3 Creating and Using OpenServer ESP Installation

Diskettes on DOS

1. Load the Equinox SuperSerial Software CD into your CD-ROM drive.

2. Set your default drive to the CD-ROM drive letter.

3. Run the command MAKEUNIX and select the appropriate Equinox

product and operating system for which diskettes are needed.

4. Once the OpenServer installation diskette is created, refer to

the following le for detailed installation instructions:

/drivers/esp/sco/readme.txt

2.4.4 Creating and Using OpenServer ESP Installation

Diskettes on Microsoft Windows

1. Load the Equinox SuperSerial Software CD into your CD-ROM drive.

• If you have autoplay enabled, the Equinox SuperSerial Software

Installation screen will appear.

• If you do not have autoplay enabled, set your default drive to

D: and run the command D:\SETUP, where D: is your CD-ROM

drive letter.

2. Click UNIX on the Main Window.

3. Select the UNIX operating system for which you need drivers. Follow

the on-screen instructions for creating an installation diskette.

4. Once the OpenServer installation diskette is created, refer to

the following le for detailed installation instructions:

/drivers/esp/sco/readme.txt

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Avocent Hub SuperSerial User Manual Page 12