Avocent LCD17SWT8-201 User's Guide download pdf (Page 14)

8 Integrated LCD KVM Switch Installer/User Guide

To upgrade your Integrated LCD KVM Switch:

Prior to beginning the firmware upgrade process, ensure that you have

an RS-232 port (COM port), a mouse and a keyboard directly connected

to the host server. You will also need the upgrade cable, upgrade utility

and upgrade file.

NOTE: When enabling the upgrade mode via the OSD, be sure to connect a

monitor directly to the host server that performs the upgrade.

1. Turn on the Integrated LCD KVM Switch.

2. Press the Menu button twice to invoke the OSD menu and press F1

to enter the Setup Page. Navigate to Upgrade Firmware and press

the

Enter button.

3. Select Yes and press the Enter button to enable upgrade mode.

4. Use the firmware upgrade cable to connect the RS-232 port (COM

port) of the host server to the Daisy Chain In port of the (primary)

Integrated LCD KVM Switch.

5. Double-click on the SV1000 upgrade utility icon to bring up the

following window.

NOTE: The firmware upgrade process automatically upgrades all Integrated LCD

KVM Switches daisy-chained to your primary switch.

Figure 1.6: Main Upgrade Utility Window

6. Click Select File to locate the firmware upgrade file.

7. Click Check Version to see the current firmware version of your

Integrated LCD KVM Switch. If the selected firmware file is a

newer version, click Upgrade to start the upgrade process.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Avocent LCD17SWT8-201 User's Guide Page 14