Avocent PM1001V-401 Datasheet Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
Specications
ENVIRONMENTAL SENSOR
Physical Dimensions (W x D x H)
3 x 3 x 1.5 in. (7.6 x 7.6 x 3.8 cm)
Temperature Sensor
Range: -45° to +115°C
Accuracy: 1°C
Humidity Sensor (PMHD-THS only)
Range: -0 - 100%
Accuracy: 2%
Daisy Chaining Capability
Up to 3 sensors per PDU sensor port
External Power Required
No
Cable Type
Standard CAT-5 Patch Cable
Maximum Cable Length
1200 ft. (between the PDU and the last sensor
in the daisy chain)
PM 3000/2000/1000 PDU
firmware compatibility
Version 1.3.0 and higher
HARWARE
Weight
3- and 6-outlet horizontal models:
27.3 lbs. without power cord
10-outlet horizontal models:
5.2 lbs. without power cord
24-outlet vertical models:
14.8 lbs. without power cord
20-outlet vertical models:
11 lbs. without power cord
Physical Dimensions (W x D x H)
3- and 6-outlet horizontal models:
17 x 8.272 x 1.719 in. (43.2 x 21 x 4.4 cm)
10-outlet horizontal models:
17 x 5.5 x 1.7 in. (43.2 x 14 x 4.3 cm)
24-outlet vertical models:
2.2 x 3.15 x 66 in. (5.6 x 8 x 167.6 cm)
20-outlet vertical models:
2.2 x 3.2 x 52 in. (5.6 x 8.1 x 132.1 cm)
Note: PM 1000 PDU height is 46 in. (116.8 cm)
Environmental
Operating Temperature: 50° to 113°F
(10° to 45°C)
Storage Temperature: -40° to 149°F
(-40° to 65°C)
Network Connection
Number: 1
Type: 10/100/1000 Ethernet
External Sensor Connections:
Number: 2
Type: RJ-45
Accessories Included
Rack-mount kit, toolless-mounting hardware with
vertical models and outlet retention clips
Warranty
Two Years
Communications options supported
Browser, CLI, SNMP, Serial or IP (using DSView 3
software or supported Avocent appliances)
Standards
Approved Agency: UL, FCC, cUL, CE, VCCI,
C-Tick, CB
Features and benets
Outlet-Level, Phase-Level and Strip-Level Metering with Threshold/Alert
Capabilities – Provides preemptive notification of any impending overload issues
before they occur and simplifies the task of installing new equipment
Note - measurement resolution +/- 5%
Capability to Remotely Switch Outlets Through Onboard Web Interface,
DSView 3 Management Software – Allows power to hung up IT equipment to be
recycled, turned on or turned off remotely for faster resolution time (not available on
PM 1000 or PM 2000 PDUs)
Onboard Web Interface – Can be installed for direct access right out of the box
or it can be configured as part of a larger integrated solution using the DSView 3
management software
IP and Serial Interface Options – Options to install by connecting directly to the
network or save IP connections by using the serial interface to connect directly to
Avocent appliances already connected to the network
Daisy Chaining – Saves the number of IP addresses or console/KVM ports that are
required to manage all power distribution needs
Integration with DSView 3 Management Software – Single interface for management
of IT equipment and PDUs simplifies mapping of outlets to servers and other equipment
in order to reduce and minimize power cycling the wrong equipment
Integration with DSView 3 Software Power Manager Plug-InTrack historical trends
to measure and monitor IT power consumption, capacity and cost in order to understand
what issues exist and to make more informed decisions in the future
Electronic Overcurrent Protection (OCP) – An added layer of protection that is
activated in the event of minor overloads; during such events, outlets are turned off
first instead of the primary OCP tripping
Sequential Startup – Protects integrity of all upstream electrical infrastructure by
staggering the inrush current draw of all plugged-in devices
Supports Environmental Sensors – Chain up to six environmental sensors per PDU to
measure and monitor temperature and humidity at several different points within the rack
for notification of any impending environmental issues
Daisy Chain
Environmental
Sensors
Environmental
Sensors
Page view 2
1 2 3 4

Comments to this Manuals

No comments