Avocent SwitchView User Manual download pdf (Page 41)

Chapter 3: Operations 35

34 SwitchView IP Installer/User Guide

Chapter 3: Operations 35

Figure 3.4: Flash Update Program Dialog Box

5. From the Name of Update File text box, browse for the new rmware

image le you downloaded and select it.

6. Type the admin username and password and click Start.

7. When the upload process is complete, click Close. The SwitchView IP

is now reset and will reect the new rmware updates the next time a

viewing session is launched. Previously stored user data is retained.

NOTE: If the Status window indicates the upload process failed, check the failure

message, resolve the issue and try again. If failures persist, perform a reset (unplug power

and plug power back in) on the SwitchView IP. If a reset does not resolve the failures,

perform a factory default reset by depressing the switch located next to the Power port on

the back of the unit.

CAUTION: A factory default reset will erase all stored user data and the IP address, so

you will need to re-enter it. Do not abort the operation during update. Aborting the update

operation may render the device unbootable and require the device to be replaced.

Using SwitchView IP Find to locate other SwitchView IPs

The SwitchView IP Find utility searches for SwitchView IP devices

installed in a network segment.

To use SwitchView IP Find:

1. From the Avocent web site at www.avocent.com/support, download the

latest SwitchView IP Find utility to a client computer.

2. From the client computer, launch SwitchView IPFIND.EXE.

3. From the SwitchView IP Find dialog box, type the network broadcast

address of the segment you want to search and click Find SwitchView

IP Devices.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

No comments

Avocent SwitchView User Manual Page 41